Concrete cutting in Huntington Beach CA - clean openings cut where you need them
Need an opening for a drain line, a doorway or a broken section of slab? We check what's inside first, then cut it straight.
- Licensed and fully insured.
- Free estimates at your property.
- Replies within 1 business day.
Why would you need concrete cut, and what goes into the price?
Concrete cutting in Huntington Beach means using saws and core drills to open up a slab or a wall, so you can run a drain or pipe, add a doorway, or take out a section of driveway or patio without breaking up the rest.
Usually the cut is the start of a bigger job, and you're calling because a plumber needs a trench, a section of slab has failed or a wall needs an opening. We're based in Huntington Beach and do this work across Orange County, in Huntington Beach and the cities around it. The price mostly turns on how many feet we cut, how thick the concrete is, whether there's rebar inside, the steel bars that hold a slab together and slow the blade down, and whether we're also breaking out and hauling the pieces. The schedule turns on what's inside the slab, because if it needs a scan first, that has to happen before any saw comes out, and my written estimate lays out both for your job.
How do you know you need concrete cut?
Water pooling on the slab
When rain or hose water sits on a patio or runs back toward the house, the fix often starts with cutting a trench for a drain line. Left alone, that water keeps soaking the ground under the slab and along your house, and the slab can start to settle.
One sunken or broken panel
A single section of driveway that's cracked through or dropped below the rest can usually be cut out along clean lines and replaced without tearing up the whole thing. Waiting lets the broken edges chip and the lip grow into a trip, and water works its way under the panels beside it.
A remodel needs a path
Moving a bathroom, adding a sink in the garage or running conduit to a new spot usually means a trench through the floor slab or a hole through a wall. Until that cut is made, the plumber or electrician can't finish, so it tends to hold up the whole project.
How we handle concrete cutting, start to finish
Before a blade touches your slab, we find out what's inside it. If there's any chance it's post-tensioned, built with steel cables stretched tight through the concrete, we want it scanned and cleared first. Then I pick the saw that fits the surface and the thickness, and our crew marks the lines, makes the cuts and, if it's part of the job, breaks out and hauls the pieces. Our estimate says plainly whether we're only making the cuts or also breaking out and hauling, so you know what you'll be left with when the saw goes quiet.
Cutting is often the first half of the job. When a section of driveway comes out, we can pour the replacement as part of concrete driveway building, and a drain trench cut through a back slab often leads into concrete patio construction once the line is in. If you're patching, I'd put the money into the base under the new section before the finish on top, because a nice surface on loose dirt sinks right along with it.
Get a written cutting estimate for your slab or wall
Send the form and we'll get back to you within one business day to set up a visit. I'll look at the cut on site and give you a free written estimate, with no obligation.
- info@huntingtonbeachconcretecompany.com
- Based in
- Huntington Beach, CA 92648
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 6 AM–9 PM
What happens after you call us about a cut?
Here's how a cutting job runs from your first call to the last walk-through, and who you'll be dealing with at each step.
Call or send the form
You call (657) 329-2092 or send the form, and we get back to you to set up a visit. Tell us where the cut goes and whether it's in a slab or a wall.
I walk the site with you
I look at the cut, ask what the concrete carries and how you use it, and check how we'll get saws to it. You get a written estimate that lists what's in and what's out, including whether breaking and hauling are part of the price.
We clear the slab and cut
Once you say go, we pull any permit the job needs and set up the inspections, and if I'm unsure what your city or the county asks for, I call the office that covers your address before I write the estimate. Before the saw starts, we walk you through the plan.
We go over the finished work
When the cutting is done, we walk it with you and leave the area clean. We also talk through what comes next for the opening and how to care for the slab around it.
Why Huntington Beach homeowners call M&K for concrete cutting
I write your estimate myself
I come out, look at the job and write the estimate, and our crew does the cutting. The person who prices your job is the one who checked what's in your slab, so nothing gets lost between the visit and the work.
In business since 2013
I taught myself concrete from library books and product sheets, learned the rest on other people's crews and opened this business in 2013. That's 13 years of showing owners what's inside their concrete before anyone cuts into it.
Licensed and insured for California jobs
We're licensed and fully insured. A saw running beside your foundation, a buried pipe or a neighbor's fence is exactly the kind of work you want covered before it starts.
Before you hire anyone to cut, ask them what's inside your slab and how they'll find out. If you'd like my answer for yours, request an estimate or call (657) 329-2092.
Concrete cutting, driveways and patios in Huntington Beach
Sawing concrete throws off silica dust, and federal safety officials warn that breathing it raises the risk of silicosis, a lung disease with no cure. California's construction silica rule covers that exposure on repair, renovation and removal work, which is what most cutting jobs are, so we plan the dust as part of the cut. Outdoors that means water on the blade and keeping people and pets back from the work. Indoors, one trade association's spec calls for good air flow when a gas saw runs inside and names electric, hydraulic and air-powered saws as other choices, so tell us at the estimate if the cut is in a garage or a house.
Most of the cutting calls I get here are for older driveways and patios that need a section out, garage floors opened for new plumbing and back slabs trenched for drains, and side yards are often tight, so we bring smaller saws when a big one won't fit. We take on the same work in Fountain Valley and Costa Mesa.
Questions about concrete cutting in Huntington Beach
How much does concrete cutting cost?
Saw cutting a concrete slab usually costs about $4 to $15 per linear foot of cut across the US, and that covers the sawing alone. Thicker or reinforced slabs land higher per foot, and a small job may be priced mostly on a minimum or a charge for getting the crew and saws there rather than on the per-foot rate. My written estimate puts your own figure on it.
How do I know if my slab is post-tensioned?
The drawings, the builder or the original permit set will tell you, and when none of those settle it, the slab gets treated as post-tensioned. From the outside, a line of small patched pockets along the slab edge or rust stains at the foundation edge can be a sign. It matters because cutting one of those cables releases its force at once, and the strand can whip or burst out of the slab edge and hurt someone nearby, which is why one engineer's guidance says owners bring in a scanning contractor to find the cables and a qualified engineer to approve the cut.
Does the price for concrete cutting include hauling the concrete away?
Not always, because sawing and removal are separate jobs, and some cutters make the cut lines and leave the pieces where they are. Breaking, hauling and disposal can cost more than the sawing itself, so check what each quote includes before you compare prices.
Which California license covers concrete cutting?
The Contractors State License Board puts concrete sawing and coring in its concrete related services class. The board's same class also covers concrete breaking, so one license covers a quote that includes both cutting and breaking out the pieces. Ask any contractor which license they hold before they cut.
What is the best way to cut concrete for a drain line or a doorway?
The best way depends on the surface and the thickness, because each saw is built for a different cut. Flat saws make straight cuts in floor slabs, wall saws ride a track along a wall, hand saws reach tight spaces and smaller openings, and wire saws handle thick or heavily reinforced sections. For a round hole for pipe, drain, conduit or a mechanical line, a core drill is the usual tool.
How do I prepare my house for a concrete cutting crew?
Plan for water and electricity, because one trade association's spec makes the owner responsible for giving the cutting crew both. Clear the area around the cut, and have any drawings of the slab ready so we can check what's inside before the saw comes out.
Related services that often follow a cut
Concrete driveway building
When a cracked or sunken driveway section comes out, the opening needs a new pour on a packed base so it sits level with the panels around it.
View service Concrete driveway buildingConcrete patio construction
A new patio is a good time to run drain lines and cut out tired concrete, so the slab sheds water away from your house instead of pooling.
View service Concrete patio construction
Service areas for concrete cutting around Huntington Beach
M&K Huntington Beach Concrete Company is based in Huntington Beach, CA, and cuts slabs and walls across Orange County. The 12 cities below have their own pages, including Seal Beach and Westminster, and we work in many cities that aren't listed here.
Huntington Beach, CA
Get your concrete cut planned right
Send the cut's location, whether it's in a slab or a wall, and any drawings or the original permit set you have, so I can check what's inside before I come out.